Ocala Drywall Experts
Drywall Finishing in Ocala
Finishing-only work runs $1.00 to $1.75 per square foot, which covers taping, mudding, sanding, and a texture or smooth finish on board that's already hung. This is the service to call if you have board up — maybe from a framer or another contractor — and need the seams, corners, and screw holes brought to a paint-ready wall.
Taping and mudding alone, without a texture step, runs $1.00 to $2.00 per square foot as a close companion service. Texture matching on top of any finish work adds $0.75 to $1.50 per square foot, since matching an existing orange peel, knockdown, or skip trowel pattern takes more passes and more drying time between coats than a flat finish.
What Finishing Covers
We tape every seam with paper or mesh tape, apply three coats of joint compound with drying and sanding time between each coat, fill every screw head, and finish corners with corner bead and compound. The last step is texture — orange peel, knockdown, skip trowel, or a smooth skim finish, matched to the rest of the house or built fresh for a new room.
- Tape and bed every seam
- Three-coat mud and sand process
- Fill screw heads and finish corner bead
- Texture match or smooth skim finish
- Paint-ready wall at handoff
When You Need Finishing Only
This service fits a few situations: a framer or builder hung the board and stopped there, a DIY hang needs professional finishing, or an older section of wall needs a fresh texture pass to match a renovation next door. We also finish board after a repair when the patch itself is handled but the surrounding wall needs a blended texture coat.
What Changes the Price
Square footage is the base number. Texture type changes the labor — a smooth Level 5 finish takes more coats and more sanding than a standard orange peel, so it sits at the higher end. Matching an existing texture pattern that's uneven or aged adds time, which is why texture matching carries its own add-on cost of $0.75 to $1.50 per square foot on top of base finishing or repair work.
What to Expect
Finishing work needs drying time between coats, so even a single room usually spans two to three days from first tape to final sand, longer if the humidity is high or the room is large. We cover floors and nearby surfaces for dust, and we do a final light sand pass so the wall is smooth to the touch before we call it done.
Questions
Yes, that's most of what this service covers. We check the hang for any loose screws or gaps before we start taping, then handle the full finish from there.
Three coats is standard — an embedding coat over the tape, a fill coat, and a final finish coat, each sanded smooth before the next goes on. Skipping coats shows up later as visible seams once paint goes on.
In most cases, yes. We look at the existing pattern, test a sample area, and adjust the spray or trowel technique until it blends. Texture matching adds $0.75 to $1.50 per square foot to the base finishing cost.
Related services
Ready to get the wall fixed?
Call for a free written quote, or send the form and we will call you back.